Description
Irwin Hanson #3 Straight Flute Screw Extractor is designed for softer materials or thin walled pieces such as pipes & fittings. The design eases extraction because it does not expand the material as you remove it. It removes both left hand & right hand threaded parts. It removes bolts & screws 7/16" & 1/8" NPT, 10 mm, 1/8" BSP. It uses 15/64" drill bit. Made from rugged, high carbon steel for use in soft materials or thin-walled pieces such as pipe and fittings. Able to remove left-hand bolts as well as right-hand bolts. Extractor size and recommended drill bit size are etched on each tool for easy identification.
- #3 Straight Flute Screw Extractor
- Designed for softer materials or thin walled pieces such as pipes & fittings
- Eases extraction because it does not expand the material as you remove it
- Removes both left hand & right hand threaded parts
- Removes bolts & screws 7/16 In. & 1/8 In. NPT, 10 mm, 1/8 In. BSP
- Uses 15/64 In. drill bit
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. For more information go to www.P65Warnings.ca.gov